Time Timer Watch

For help with the Time Timer Watch.

Operation & How-To

How to use the Time Timer Watch
How to use the FOB accessory
How to replace the watch band.
Time Timer Watch User Guide
How to set the time.
How to set a repeating timer.
How to set the alarm.
Original Timer vs. Custom Timer
How to set an Original Timer.
How to set a Custom Timer.
How to replace the battery.

Frequently Asked Questions

What size Time Timer Watch is best for me or my child?
What type of battery does the Time Timer Watch use?
What is the duration of the Time Timer Watch alert at the end of a Timer or Alarm?
How does the Time Timer Watch operate when set to repeat?
What do the icons or symbols on the Time Timer Watch mean?
Can I set multiple timers on the Time Timer Watch?
Can I set multiple alarms?
How long does the Time Timer Watch battery last?
Is the watch waterproof?
Is the watch silent to operate?

Troubleshooting

The watch band is broken or needs repair.

How to use the Time Timer Watch

The Time Timer Watch has three primary modes: Clock, Alarm and Timer. To watch a video on how to use these modes, please view the video embedded at the bottom of this article.

The Different Modes

To begin, it's important to know what mode you're in—and the watch face for each mode looks a little bit different. The image below shows what the watch face for each mode looks like.

Clock Mode

The Clock mode displays time of day using both a traditional analog clock face and a digital numeric display. If a Time Timer is running or an Alarm has been set, a unique icon displays on the right side of the watch face. Time can be viewed in 12- or 24-hour format.

Time Timer Mode

Timer Mode is the most powerful feature of the Time Timer Watch and operates like traditional Time Timer products. You can set an Original 60-minute Timer where time is displayed as a fraction of an hour, or a Custom Timer where a full disk represents any value of time from 1 to 99 minutes.

You can customize the type of alert you'd like to receive at the end of timing. The alert can be a slight vibration on the wrist, an audible beep or both!

Timers can also be set to repeat. For example, if you'd like to receive a vibrate and/or audible alert every 3 minutes, simply set a Custom Timer for 3 minutes and activate the repeat feature. Note that you may see a slight reduction in battery life by frequently using a repeating timer. Click here for more information on Time Timer Watch battery life.

Alarm Mode

Alarm mode provides a single time-of-day alarm where you can be reminded of a particular event at some point during the day.

You can customize the type of alert you'd like to receive at the time of day for which your alarm is set. The alert can be a slight vibration on the wrist, an audible beep or both!

Currently, you cannot set multiple time-of-day alarms with the Time Timer Watch. If there's a particular activity you'd like be be reminded of frequently, you might be able to use a custom repeating timer.

The Time Timer Watch Icons

There are a few different icons that you might see on your Time Timer Watch screen. The image below shows what each icon represents.

For a little extra added context, the image below shows what the Time Timer Watch face would look like if:

  • You're currently viewing Time Timer Mode
  • Have a 60-minute timer running with both an audible and vibrate alert active
  • The timer is set to repeat after remaining 45 minutes is up 

View the walkthrough video

The video below will walk you through all the features of the Time Timer Watch including how to set the Clock, Alarm and Timer modes.

How to use the FOB accessory

-

How to replace the watch band.

To remove the band from you Time Timer Watch*: 

1. Slide lever inward to unlock band.

2. While holding the lever, release the left pin, then the right pin. 

To place your new band on the Time Timer Watch: 

1. While holding the lever, insert the right pin, then the left pin.

2. Release lever to lock band.

*Time Timer Watch PLUS models purchased do not have removable watch bands. This includes the adult charcoal and children charcoal, lime green, sky blue, and berry pink. Only updated Time Timer Watch Adult/Large (sequoia green) and Child/Small (arctic white) have replaceable watch bands. 

Time Timer Watch User Guide

To download the Time Timer Watch User Guide, click download arrow in the left hand corner

WARNING! INGESTION HAZARD: This product contains a button cell or coin battery.

WATCH_UserGuides_100523.pdf

How to set the time.

To set the time on your Time Timer Watch PLUS, please do the following:

  1. Press "Mode" until you are in Clock Mode. Then press and hold the Set button for three seconds.
  2. Use the plus and minus buttons to adjust the current hour.
  3. Then press the Next (Mode) button and use the plus and minus buttons to set the current minute, seconds, clock format (12- or 24-hour) and am/pm meridian.
  4. Press the Set button once to confirm.

To learn how to use all the features of the Time Timer Watch,we recommend you watch the video below.

How to set a repeating timer.

The Time Timer Watch will allow the user to have a single timer running at any one time. The user can choose to set the timer on repeat.

Example: When a 15-minute timer is active and the repeat option is enabled, the Time Timer Watch will automatically alert you (with the alert type of your choice) every 15 minutes. This will continue until the timer is manually stopped or the repeat function is turned off by the user. The repeat function is active when you see an arrow moving in a circle in the upper right corner of the watch face. When the repeat option is not active, you'll see a simple dash "-" icon in its place.

To set a repeating timer on your Time Timer Watch, please do the following:

1. To turn on the repeat setting for the Time Timer, you must be in the Timer mode of operation. Press the MODE/ NEXT button to cycle through the Time Timer Watch PLUS operation modes (Clock, Alarm and Timer) until you arrive at Timer mode.

2. Once in the Timer mode of operation, hold down the SET button for 3 seconds until the timer duration at the bottom of the screen begins to blink.

3. Push the MODE/NEXT button to cycle through the various settings until you reach the repeat setting. Settings for Timer mode can be changed to your preference when flashing by using the PLUS “+” or MINUS “-“ buttons on the side of the watch. The settings will move through the options below in this order:
Duration of timer

  • Alert for timer (audible alert / vibrate / no alert)
  • Type of timer (Original Timer or Custom Timer)
  • Repeat (an arrow going in a circle / repeat not chosen is shown by a single dash “-“)

4. Press the SET button to save your setting preference.

5. Press the START button to begin the Timer.

Please note that, if set to repeat, the timer will immediately begin repeating upon completing its cycle. The Timer will continue repeating until the user turns off the repeat function. 

The Time Timer Watch Icons

There are a few different icons that you might see on your Time Timer Watch screen. The image below shows what each icon represents.

For a little extra added context, the image below shows what the Time Timer Watch face would look like if:

  • You're currently viewing Time Timer Mode
  • Have a 60-minute timer running with both an audible and vibrate alert active
  • The timer is set to repeat after remaining 45 minutes is up 

Click here to learn more about the other modes and features of the Time Timer Watch.

How to set the alarm.

The Time Timer Watch alarm mode allows you to set a single time-of-day alarm where you can be reminded of a particular event at some point during the day.

You can customize the type of alert you'd like to receive at the time of day for which your alarm is set. The alert can be a slight vibration on the wrist, an audible beep or both!

Currently, you cannot set multiple time-of-day alarms with the Time Timer Watch. If there's a particular activity you'd like be be reminded of frequently, you might be able to use a custom repeating timer.

To set the alarm on your Time Timer Watch, please do the following:

  1. Press "Mode" until you are in Alarm Mode.
  2. Then press and hold the Set button for three seconds. Use the plus and minus buttons to adjust the alarm hour.
  3. Next, press the Next (Mode) button and use the plus and minus buttons to set the alarm time.
  4. Press the Next button and plus button to choose the type of alert (vibrate, audible or both).
  5. Press the Set button once to confirm.

To learn how to use all the features of the Time Timer Watch,we recommend you watch the video below.

Original Timer vs. Custom Timer

Only a single timer can be set on the Time Timer Watch, but it can be set to repeat at the interval you choose.

In Original Timer mode, the full red disk represents time as a fraction of an hour. In Custom Timer mode, a full red disk represents any amount of time.

We recommend using the Original Timer mode when you need between 10 and 60 Minutes, and Custom Timer mode when you need much more or much less than 60 minutes. A Custom Timer can be set to any duration between 1 minute and 99 hours 59 minutes, in 1-minute increments.

To learn how to use all the features of the Time Timer Watch, we recommend you watch the video below.

How to set an Original Timer.

A single timer can be set on the Time Timer Watch, but it can be set to repeat at the interval you choose. To set an Original Timer on your Time Timer Watch, please do the following:

  1. Press "Mode" until you are in Timer mode (a portion of the red disk will display).
  2. Press the Set button for three seconds until the time begins to flash. Then use the plus and minus buttons to set the duration of your timer and press Next to confirm. An Original Timer can be set to any duration between 1 and 60 minutes, in 1-minute increments. 
  3. Then use the plus and minus icons to choose the type of alert that will occur when time runs out (vibrate, audible or both). Press Next to confirm.
  4. Finally, use the plus and minus buttons to select Original Timer and indicate if you'd like the timer to repeat or only count down once. Press Next to confirm a final time.
  5. To start the Timer, push the red start/stop button.

To learn how to use all the features of the Time Timer Watch, we recommend you watch the video below.

How to set a Custom Timer.

A single timer can be set on the Time Timer Watch, but it can be set to repeat at the interval you choose. To set a Custom Timer on your Time Timer Watch, please do the following:

  1. Press "Mode" until you are in Timer mode (a portion of the red disk will display).
  2. Press the Set button for three seconds until the time begins to flash. Then use the plus and minus buttons to set the duration of your timer and press Next to confirm. A custom timer can be set to any duration between 1 minute and 99 hours 59 minutes, in 1-minute increments.
  3. Then use the plus and minus icons to choose the type of alert that will occur when time runs out (vibrate, audible or both). Press Next to confirm.
  4. Then, use the plus and minus buttons to select Custom Timer. This is shown with the full circle or partial circle icons.
  5. Press Next to confirm.
  6. Indicate if you would like the timer to repeat or only count down once. This is indicated by the circle arrow or dash icon. 
  7. Press Next to confirm.
  8. Push the Set button down to secure the Custom Timer you have created.
  9. Start the Timer by pushing the red start/stop button.

To learn how to use all the features of the Time Timer Watch, we recommend you watch the video below.

How to replace the battery.

The Time Timer Watch takes the battery type CR2032.

WARNING! INGESTION HAZARD: This product contains a button cell or coin battery.

 

With the updated Time Timer Watch models follow these steps to replace battery.

Once you have purchased the battery, replace by: 

1. Use a coin or flat head screw driver to open the battery cover by turning counter clock wise. 

2. Gently lift the tab and remove current battery. 

3. (With tab still lifted) Insert the new battery under the tab. 

4. Replace the back and close battery cover by turning clockwise. 

If you have the Time Timer Watch PLUS adult (charcoal) or child (charcoal, lime green, sky blue, berry pink): 

The Time Timer Watch PLUS will require a professional to replace the battery. Most jewelry shops offer battery replacements for watches. Just ensure they know the battery type CR2032 is required for the Time Timer Watch PLUS. 

 

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children.

• Do NOT dispose of batteries in household trash or incinerate.

• Even used batteries may cause severe injury or death.

• Call a local poison control center for treatment information.

• Non-rechargeable batteries are not to be recharged.

• Do not force discharge, recharge, disassemble, heat above

100ºC/212ºF or incinerate. Doing so may result in injury due to

venting, leakage or explosion resulting in chemical burns.

• Ensure the batteries are installed correctly according to polarity

(+ and -).

• Do not mix old and new batteries, different brands or types of

batteries, such as alkaline, carbon-zinc, or rechargeable batteries.

• Remove and immediately recycle or dispose of batteries from

equipment not used for an extended period of time according to

local regulations.

• Always completely secure the battery compartment. If the battery

compartment does not close securely, stop using the product,

remove the batteries, and keep them away from children.

The watch band is broken or needs repair.

If you would like a replacement watch band,  please contact us at support@timetimer-europe.com
 

For replacing your watch band, please refer to this article HERE. 

What size Time Timer Watch is best for me or my child?

The Time Timer Watch PLUS comes in two different sizes, small and large. To get a better idea of how the watch will fit on your wrist and determine which size is best for you, download our Sizing Instructions below.

This is a PDF that you can download and print at home. It has actual-size representations of both sizes of the Time Timer Watch PLUS. Simply print this PDF, grab your scissors to cut out the watches and try them on!

 

WatchSizing_TTW8AB-LRG-W_TT8YB-SML-W_202408V3_wkg.pdf

What type of battery does the Time Timer Watch use?

The Time Timer Watch uses a CR2032. If you need to replace your battery, you can view those instructions here. 

WARNING! INGESTION HAZARD: This product contains a button cell or coin battery.

What is the duration of the Time Timer Watch alert at the end of a Timer or Alarm?

Whether in the Timer or Alarm mode you have the option to set a vibrate alert, audible alert, both or neither to occur at the end of a Timer or Alarm.

Vibrate Alert Only

The vibration alert for the Timer or Alarm will occur 8 times within 8 seconds. 

Audible Alert Only

The audible alert for the Timer or Alarm will occur 8 times within 8 seconds. 

Both Vibrate and Audible Alert

If both the vibration and the audible alert are enabled for the Timer or Alarm, both the audible alert and the vibration will occur eight times within 8 seconds (alternating between audible alert, vibrate, audible alert, vibrate…).

No Alert

No alert, denoted by two dashes (--) during the setting process, will not alert the user at the end of a Timer or Alarm.

How does the Time Timer Watch operate when set to repeat?

The Time Timer Watch (Large and Small) Timer, if set to repeat,will immediately begin repeating upon the Timer completing its cycle.The Timer will continue repeating until the user turns off the repeat function.

What do the icons or symbols on the Time Timer Watch mean?

The Time Timer Watch uses a few different icons to tell you what mode your watch is in and the status of any potential timers are alarms that may be active.

The Different Modes

To begin, it's important to know what mode you're in—and the watch face for each mode looks a little bit different. The image below shows what the watch face for each mode looks like.

The Time Timer Watch's Icons

There are a few different icons that you might see on your Watch's screen. The image below shows what each icon represents.

For a little extra added context, the image below shows what the Time Timer Watch face would look like if:

  • You're currently viewing Time Timer Mode
  • Have a 60-minute timer running with both an audible and vibrate alert active
  • The timer is set to repeat after remaining 45 minutes is up 

Can I set multiple timers on the Time Timer Watch?

Only a single timer can be set on the Time Timer Watch, but it can be set to repeat at the interval you choose. There are two different timer modes on the Watch, the Original Timer and Custom Timer. Click here to learn more about the two timer modes.

For instructions on setting a Custom Timer, click here.

For instructions on setting an Original Timer, click here.

Can I set multiple alarms?

The Time Timer Watch's alarm mode allows you to set a single time-of-day alarm where you can be reminded of a particular event at some point during the day. View this article for instructions on how to set an alarm.

You can customize the type of alert you'd like to receive at the time of day for which your alarm is set. The alert can be a slight vibration on the wrist, an audible beep or both!

Currently, you cannot set multiple time-of-day alarms with the Time Timer Watch. If there's a particular activity you'd like be be reminded of frequently, you might be able to use a custom repeating timer.

Timer mode is the most powerful feature of the Time Timer Watch and operates like traditional Time Timer products. You can set an Original 60-minute Timer where time is displayed as a fraction of an hour, or a Custom Timer where a full disk represents any value of time from 1 to 99 minutes.

You can customize the type of alert you'd like to receive at the end of timing. The alert can be a slight vibration on the wrist, an audible beep or both!

Timers can also be set to repeat. For example, if you'd like to receive a vibrate and/or audible alert every 3 minutes, simply set a Custom Timer for 3 minutes and activate the repeat feature. Note that you may see a slight reduction in battery life by frequently using a repeating timer. Click here for more information on Time Timer Watch's battery life.

How long does the Time Timer Watch battery last?

The expected life of the battery is approximately eight months, based on typical use. If the watch is used to time a short duration (or left running) on the repeat function with vibrating alert, then the battery life will be significantly shorter due to the higher battery requirements for vibration. If a spontaneous watch reset to original factory settings occurs, there is no backlight or a dim display, please replace the battery.

WARNING! INGESTION HAZARD: This product contains a button cell or coin battery.

Is the watch waterproof?

The Time Timer Watch is water resistant up to 30 meters, which means that it can be worn for general use in situations like the shower, a rain storm, or the pool.  While the watch can be worn in those types of situations, the buttons to set the watch should not be pressed while the watch is under water.  This can cause water to enter the main housing of the watch.  General wear and use should not cause water to enter the watch.  The watch is not suitable for diving.

 

Is the watch silent to operate?

Yes! As of May 2018, all newly purchased models of the Time Timer Watch PLUS have silent operation. This means that the watch will not beep as the user presses its buttons to cycle through different modes or settings.